UHF TACSAT and UHF/ VHF Line of Sight RF Over Fibre System
What is Lynxsat?
- A Fully Integrated Antenna Remoting Solution for Tactical Radios
- Works with UHF TACSAT and VHF/ UHF Line of Sight
- Separate the Radio from the Antenna by up to 10 km
- True Two Box Solution with Full Web Based Monitor and Control
- Easy Local Control from Radio Interface Unit Front Panel
- Ruggedised to Survive Harsh Environments
- Choice of DC or Mains Power
- Single Duplex Fibre Between Radio Interface Unit and Antenna interface Unit
- Optional Motorised UHF Tacsat Positioner
What are the Applications for Lynxsat?
- Use in Theatre to Protect Secure Radio and Personnel from Incoming Fire
- Use on Ships to Connect from Radio Room to Mast Mount Antenna
- Use in Civil Emergencies to Connect the Radio in a Basement to a Roof Mounted Antenna
- Use to Penetrate an EMC Shielded Facility without Compromising its Integrity
What are the Advantages of Lynxsat?
- None of the Loss Associated with Copper Connected Systems
- Integrated Filter Bank Covering 32 to 512 MHz LOS and UHF TACSAT
- Head End Booster Delivers up to 45 Watts at the Antenna
- Low Noise LNA Boosts Received Signals by 45 dB
- Maximises QOS to Field Based Tactical Terminals
- Excellent Protection of Radio Equipment from EMP/ EMI discharges
- Works with all Common Tactical UHF/ VHF Radios
- No Need to Step Outside to Control the Antenna Interface Unit or Optional Motorised UHF Tacsat Positioner
Lynxsat Specifications
System:
- Output power range 2W to 45W
- Frequency range 30 to 512MHz (selectable bands)
- Transmit Harmonics -65dBc
- Transmit Spurious -65dBc
- VSWR 1.2:1
- Input/ output impedance 50Ω
- Receive LNA gain 45dB
- Receive LNA noise figure 2dB typ.
- Operating temperature range - 20°C (-4°F) to 50°C (122°F) ambient
- Operating humidity to 100% non-condensing
- Operating altitude to 3,050m (10,000ft)
Indoor unit:
- RF Connector – coaxial N female
- M&C connector – ruggedised RJ45 Ethernet
- PTT connector – 62GB circular
- Fibre-optic connector – ruggedised, field cleanable, beam spreading, duplex, hermaphroditic
- Power supply – 28VDC and 115/230VAC, 50/60 Hz
- Power connectors – 62GB circular
- Power consumption - 25W max
- Dimensions – 4U High x ½ Rack Width x 36 cm deep
- Weight - 3kg
Outdoor unit:
- RF Connector – coaxial N female
- Fibre-optic connector – ruggedised, field cleanable, beam spreading, duplex, hermaphroditic
- Serial/ power out connector (for use with motorised UHF TACSAT Tripod) – 62GB circular
- Power supply – 28VDC input, (optional 20 to 38V DC and 115/230VAC, 50/60Hz adaptor available)
- Power in connector – 62GB circular
- Power consumption - 250W max with automatic power save modes
- Dimensions – 30 x 30 x 19 cm (including heat sink)
- Weight - 8kg