The
QPT-1301C is part of the product line of “Smart” positioning systems which
are significantly more capable than basic pan and tilt units. These enhanced
designs embed powerful microprocessor controllers, which can be effortlessly
programmed to adjust limits of motion, speed and Azimuth/Elevation position.QPT-901C
The
QPT-901C is part of the product line of “Smart” positioning systems which
are significantly more capable than basic pan and tilt units. These enhanced
designs embed powerful microprocessor controllers, which can be effortlessly
programmed to adjust limits of motion, speed and Azimuth/Elevation position.
Embedded functions include preset repeatable positions, tours, jog or direct manual entry with 12 bit absolute position feedback, convenient edit and adjustable dwell times. The “Smart” concept eliminates the need for separate interface electronics and is connected to the control station using a cost efficient “single cable feed”. No calibration or homing cycle is required for startup.
RS232/422/485 or optional Ethernet connectivity can be used to control both the pan and tilt functions as well as the instruments and equipment mounted on the positioner. QuickSet “Smart” systems interface with stabilization and tracking systems, on-screen displays and system interface programs of various types.
The QPT-901C includes auto-baud detection and includes a 6ft test cable (custom lengths of cable are available upon request).